
Engineered, load-bearing backfill for roads and pavements. Flowable placement without mechanical compaction reduces voids and settlement risks while accelerating construction.
SPEAK TO OUR ENGINEERS
Our engineers assess excavated sand and project requirements to develop a suitable FillWaves® mix. Cement, compound and water are proportioned to meet specified strength and bearing-capacity targets, with re-excavatability considered where required.
Citrine™ mixing systems produce FillWaves® on-site using suitable excavated sand, cement, FillWaves® compound and water. Automated dosing and mixing create a homogeneous, flowable backfill, with batches documented for traceability. This reduces reliance on imported aggregates and transport.
FillWaves® is placed as a flowable, self-compacting layer without rolling or vibration. Our site team supervises placement, checks material consistency and coordinates testing under the project quality plan. Each completed section is documented before the next stage of road construction.





Our results
FillWaves® flowable fill was developed in a three-year test programme with the American University of Sharjah and the Dubai Municipality Central Laboratory. Compressive strength, bearing capacity, permeability and thermal behaviour were tested to recognised standards — with Gulf dune sand and with fresh and saline water. Strength development is complete at 56 days.
FillWaves® provides load-bearing support for road and pavement construction. Its bearing capacity can be tailored through the mix design to meet project-specific structural requirements. Laboratory California Bearing Ratio (CBR) testing demonstrates its suitability for applications requiring stable, load-bearing backfill.
Maximum recorded CBR: 171.1%
Testing method: California Bearing Ratio (CBR)
Test condition: 10% cement mix, 7-day curing
FillWaves® is engineered to achieve project-specific compressive strength through adaptable mix designs. By adjusting the cement content and material composition, the required structural performance can be achieved while considering future re-excavatability. Laboratory testing demonstrates strength development under different curing conditions, including fresh and saline water.
28-day compressive strength: 1.50–1.96 MPa (tested 10% cement mixes)
Testing standard: ASTM D4832
Testing periods: 7, 28 and 56 days
FillWaves® is engineered for high flowability, allowing the material to spread uniformly around pipes, cables and underground utilities, even in confined spaces. Its self-compacting properties eliminate the need for mechanical compaction, helping minimise voids and achieve consistent coverage throughout the backfill.
Flow spread: 500–700 mm
Testing standard: BS EN 12350-5
Mechanical compaction: Not required



We transform your next infrastructure project from the ground up: turning excavated soil into engineered backfill, and delivering the planning, on-site production and quality control every project needs.