VOID-FREE SUPPORT FOR EVERY UTILITY UNDERGROUND

Close-up view of rippled sand dunes in low light, showing smooth, flowing shapes and fine lines on the sand surface.

VOID-FREE SUPPORT FOR EVERY UTILITY UNDERGROUND

Re-excavatable flowable soil that flows around pipes, cables and services — produced on site from the excavated sand, placed without compaction.

SPEAK TO OUR ENGINEERS

Why FillWaves fits here

Conventional

  • Excavated sand transferred away as waste
  • Compactable fill imported by truck
  • Placed in layers, compacted mechanically
  • Voids and settlement around services
  • Trench stays open for days
  • Re-excavation damages the pipe bedding
Red X Icon

FillWaves

  • Excavated sand re-used on site
  • The same sand becomes the fill
  • Flows once, around every service
  • Void-free, uniform support
  • Backfilled in one continuous pour
  • Re-excavatable where specified
FillWaves Confirm Icon

FROM EXCAVATION TO CLOSED TRENCH — ON-SITE

VOID-FREE SUPPORT FOR EVERY UTILITY UNDERGROUND

Pipes laid in an open trench before backfilling

On-site production

SOIL & MIX DESIGN

Our engineers assess the excavated sand and project requirements to develop a suitable FillWaves® mix. Cement, FillWaves® compound and fresh or saline water are proportioned to achieve the specified strength and, where required, re-excavatability.

  • Project-specific mix design
  • Fresh or saline water
  • Mix verified before production

ON-SITE PRODUCTION

The Citrine™ system mixes suitable excavated sand with cement, FillWaves® compound and water. Automated dosing produces a homogeneous, flowable backfill in documented batches. On-site production reduces reliance on imported fill and can limit transport and material handling.

  • Output: up to 40 m³/h
  • Automated dosing and mixing
  • Documented production batches

PLACEMENT & CONTROL

FillWaves® flows around pipes, cables and joints without mechanical compaction. Our engineers supervise placement and conduct regular soil testing to verify that the excavated material remains suitable for the approved mix design, supporting consistent quality throughout the backfilling process.

  • No mechanical compaction
  • Regular soil testing
  • Construction supervision

‍

Hole with pipes being filled

‍

‍

Pipes laid in the ground, half covered

‍

‍

Man pouring flowable backfill
Black background with a triangular pattern made of small evenly spaced gray dots.

Our results

PERFORMANCE BACKED BY TESTING

FillWaves® was developed through a three-year research and testing programme in collaboration with the American University of Sharjah and Dubai Municipality. Laboratory testing evaluated compressive strength, bearing capacity, hydraulic conductivity and thermal performance across different mix designs, including fresh- and saline-water conditions, using recognised testing standards.

FLOWABILITY

FillWaves® is engineered for high flowability, allowing the material to spread uniformly around pipes, cables and underground utilities, even in confined spaces. With a specified flow spread of 500–700 mm, the self-compacting material requires no mechanical compaction, helping minimise voids and ensure consistent coverage throughout the backfill.
Flow spread: 500–700 mm
‍Testing standard: BS EN 12350-5

COMPRESSIVE STRENGTH

FillWaves® is engineered to achieve project-specific compressive strength through adaptable mix designs. Laboratory testing demonstrates strength development over 7, 28 and 56 days. By adjusting the material composition, structural stability can be balanced with re-excavatability for future maintenance.

Testing standard: ASTM D4832

Testing periods: 7, 28 and 56 days

Strength: Adjustable through mix design

‍

RE-EXCAVATABILITY

FillWaves® can be engineered for future re-excavation, allowing access to buried pipes, cables and underground utilities for maintenance or replacement. By adjusting the mix design and compressive strength, the material provides the required structural support while maintaining the desired level of excavability.

Up to 300 kPa: Easy excavation by hand

300–800 kPa: Excavation with light equipment

Above 800 kPa: Mechanical excavation required

‍

DRAG

Explore other application areas

Close-up of a pile of fine gray powder with small clumps and chunks scattered around.Piles of reddish-brown and pale excavated sand on a black background
Utilities & Pipelines
Start your project
Start your project
Start your project

TELL US ABOUT YOUR PROJECT

SEND MESSAGE
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
FillWaves Innovation
FillWaves Innovation
FillWaves Innovation
A burst of dry excavated sand against a white background

One Material. Many Solutions.

We transform your next infrastructure project from the ground up: turning excavated soil into engineered backfill, and delivering the planning, on-site production and quality control every project needs.