
Low-permeability fill for landfill sealing, dams, reservoirs and structural backfill — produced on-site from excavated sand and placed without mechanical compaction.
SPEAK TO OUR ENGINEERS

Our engineers assess the excavated sand and project-specific sealing requirements to develop a suitable FillWaves® mix. Cement, FillWaves® compound and fresh or saline water are proportioned to achieve low hydraulic conductivity while meeting the required strength and workability specifications.
Citrine™ mixing systems combine suitable excavated sand, cement, FillWaves® compound and water directly on-site. Automated dosing ensures controlled material proportions according to the project-specific mix design. The result is a homogeneous, flowable material engineered for low-permeability applications.
FillWaves® is poured as a flowable, self-compacting layer without mechanical compaction. Our engineers supervise placement, monitor material consistency and coordinate quality testing against project specifications. Each section is documented to support controlled installation and the required low-permeability performance.




Our results
FillWaves® flowable fill was developed in a three-year test programme with the American University of Sharjah and the Dubai Municipality Central Laboratory. Compressive strength, bearing capacity, permeability and thermal behaviour were tested to recognised standards — with Gulf dune sand and with fresh and saline water. Strength development is complete at 56 days.
FillWaves® demonstrates very low hydraulic conductivity, significantly limiting water movement through the material. Its homogeneous structure supports applications requiring seepage control and moisture protection, including underground infrastructure and engineered containment systems.
Hydraulic conductivity: 4.1–6.7 × 10⁻⁹ m/s
Testing standard: DIN EN ISO 17892-11
Curing period: More than 28 days
FillWaves® has been laboratory-tested under highly saline conditions to evaluate its mechanical performance. Specimens prepared with seawater and cured in a high-salinity solution demonstrated continued compressive strength development, supporting the material's potential suitability for coastal and saline environments.
Mixing water salinity: 38 ppt
Curing solution salinity: 85 ppt
28-day compressive strength: 1.50 MPa



We transform your next infrastructure project from the ground up: turning excavated soil into engineered backfill, and delivering the planning, on-site production and quality control every project needs.